폴리에테르에테르케톤(PEEK) - 올해 가장 주목받는 소재 중 하나
In today’s era of rapid technological development, industries such as aerospace, humanoid robotics, and new energy vehicles are placing increasingly stringent demands on material performance. PEEK offers high strength, high modulus, and excellent stability under stress. It has become one of the most noteworthy materials of the year. Polyetheretherketone (PEEK) performs exceptionally well in humanoid […]
초미세 흑연 분말용 분쇄기
Graphite is an important non-metallic mineral. It has many properties: electrical conductivity, thermal conductivity, high-temperature resistance, thermal shock resistance, chemical stability, lubrication, and plasticity. Because of these features, it is widely used in metallurgy, machinery manufacturing, electrical, chemical, and nuclear industries. With the development of the graphite industry, the development of deep processing technologies and […]
산화알루미늄의 응용 분야 및 보강 역할
Aluminium oxide (Al₂O₃) is one of the most common and widely used inorganic materials. It is the main raw material for aluminum production. At the same time, it plays an important role in advanced ceramics, abrasives, and catalyst supports. With properties such as high temperature resistance, corrosion resistance, hardness, and insulation, aluminium oxide is applied […]
열분해 탄소 블랙: 개량 전략 및 응용 전망
Pyrolysis carbon black (also known as recovered carbon black, rCB) is a solid product obtained from high-temperature pyrolysis of waste tires, waste rubber, and other organic wastes under oxygen-free or oxygen-limited conditions. Difference from Conventional Carbon Black Conventional Carbon Black: Produced by incomplete combustion of petroleum or natural gas. The process is controlled, yielding uniform […]
다공성 탄소의 기공 부피 – 작은 기공 속의 거대한 세계
In the research and application of lithium batteries, selecting and designing anode materials is crucial for enhancing battery performance. Among these materials, porous carbon has gained widespread attention. This is due to its excellent electrochemical properties, good conductivity, and adjustable pore structure. This article will explore the significant role of the “small pores” in porous […]
초미세 분말 응집: 원인 및 분산 기술
분쇄 공정을 미세 조정하는 데 몇 주를 투자합니다. 분석기에서 D50 값은 완벽해 보입니다. 그런데 일주일 후, 고객이 제품을 테스트해보고 결과가 일정하지 않다고 연락해 옵니다. 대개 분말 응집이 원인입니다. 30μm 미만의 분말은 입자가 벌크 재료처럼 거동하지 않습니다. 입자들이 서로 달라붙고 뭉쳐서 본래의 특성을 잃어버립니다. […]
리튬 배터리 슬러리의 5가지 황금 지표를 공개합니다!
Slurry is the core raw material in electrode manufacturing. Its quality directly determines the energy density, cycle life, and safety performance of batteries. Today, we break open the “technical black box” and explain in the simplest terms the five key indicators of lithium battery slurry—helping you instantly judge battery quality. Solid Content: The “Invisible Switch” […]
공기 분사식 분쇄기와 기계식 분쇄기 기술의 비교 연구
분말 공학 분야에서 분쇄 기술은 입자 크기 분포, 입자 형태 및 생산 효율에 직접적인 영향을 미칩니다. 2025년까지 에어젯 밀과 기계식 밀은 여전히 두 가지 주요 산업 시스템으로 자리 잡고 있습니다. 본 논문에서는 작동 원리, 에너지 효율 및 입자 크기 제어 측면에서 두 시스템을 체계적으로 비교합니다. 장비 작동 원리 비교 […]
고순도 석영 생산에서 분쇄가 중요한 이유는 무엇일까요?
High Purity Quartz (HPQ) is a quartz raw material with extremely high SiO₂ content and very low impurities. The required SiO₂ content usually exceeds 99.99%. Thanks to its excellent thermal stability, very low thermal expansion coefficient, and extremely high purity, HPQ is widely used in semiconductors, photovoltaics, new displays, optical communications, and high-end quartz glass […]