Optimization of Ultrafine Grinding Process for Diatomaceous Earth in Danish
Project Background Denmark is recognized worldwide as a leading source of high-quality diatomaceous earth (diatomite). This material features high purity, an excellent porous structure, and low crystalline silica content. It also offers superior adsorption and filtration performance. Consequently, it is widely used in food-grade filter aids, functional fillers, and cosmetic raw materials. It also serves […]
Turnkey Project for Ultrafine Grinding of Resin Balls in Indonesian
1. Project Background The client, a high-quality synthetic resin manufacturer based in Indonesia, required a solution for processing raw resin balls. These materials are typically thermoplastic, meaning they are highly sensitive to temperature; heat generated by mechanical friction during grinding can easily lead to material softening, clumping, or equipment clogging. The core objective was to […]
Icing Sugar Ultrafine Grinding Line in Thailand
1. Project Overview A leading food processing enterprise in Thailand, specializing in high-quality baking and confectionery ingredients, sought to expand its production. The client required a turnkey solution for Icing Sugar Ultrafine Grinding, converting granulated sugar into a fine powder (200 mesh/approx. 75μm) while maintaining the material’s flowability and whiteness. 2. Technical Challenges Grinding sugar […]
Ultrafine Talc Grinding Project in Canada
This case study highlights the technical application of the Epic Powder Jet Mill System in achieving a delicate balance between high fineness and consistent output for a Canadian minerals processor specializing in ultrafine talc grinding. Project Background Talc is a layered silicate mineral whose industrial value is highly dependent on its aspect ratio and particle […]
Ultra-fine Grinding of Natural Graphite from Tanzania
1. Project Background Material Characteristics: Natural graphite from Tanzania is renowned for its high crystallinity, stable carbon content, and intact flake structure. However, due to its inherent toughness and layered lubricating properties, graphite is notoriously difficult to grind to micron-level sizes in traditional mechanical mills and is prone to particle agglomeration. Customer Requirements: The client […]
Ultra-fine Air Classification of Cenospheres in the UAE
1. Project Background The client, based in the United Arab Emirates (UAE), specializes in the recovery and refinement of Cenospheres from pulverized fuel ash. Cenospheres are hollow, lightweight, and high-strength microspheres widely utilized in oil drilling, aerospace, and high-performance composite materials. The Challenge: The client aimed to process 300-mesh raw feed into a specific ultra-fine […]
Ultrafine Grinding of Centella Asiatica in Malaysian
Centella Asiatica (commonly known as Gotu Kola) is highly regarded in the pharmaceutical and cosmetic industries as “plant collagen.” However, its core active compounds—such as Asiaticoside and Madecassoside—are encased within tough, fibrous cellulose cell walls. Traditional grinding methods often generate excessive heat that degrades these heat-sensitive actives and fail to reach the fineness required for […]
Ultrafine Grinding Challenge of Lithium Battery Cathode Materials at a Leading Chinese Company
With the continuous increase in requirements for energy density and rate performance in the new energy industry, the particle size distribution (PSD) of lithium iron phosphate (LFP) has become a key factor determining slurry coating quality and electrochemical performance. To address these demands, a leading domestic manufacturer focused on lithium battery cathode materials grinding to […]
Brazil Carrageenan Ultrafine Grinding Project
Carrageenan is a natural polysaccharide hydrophilic colloid extracted from red algae and is widely used in the food, pharmaceutical, and personal care industries. Due to its high toughness and heat-sensitive nature, conventional mechanical grinding methods often struggle to achieve carrageenan ultrafine grinding without damaging its chemical structure. A large Brazilian food additive manufacturer aimed to […]